FREE SHIPPING ON ORDERS OVER $150

Free Shipping to 48 states only

EXCLUDES EQUIPMENT

CALL: (570) 253-6375 or 888-MESHTEK

EMAIL: SALES@POCONOSCREEN.COM

We offer custom size frames in ALL sizes.

Please call and ask for pricing and lead time.

PMS Color Matching!

Proudly Made in USA!

1 - 16 of 30

Page:
  1. 1
  2. 2
  • MIXE-6002 GREEN

    Regular Price:

    $28.65
    Instructions: 100% cotton white or dyed fabric. consistent & accurate color matches Stencils: Use any direct emulsion or capillary film compatible with plastisol inks Additives: We do not recommend reducing Mixopake inks when printing on dark fabrics as this will reduce the opacity of the fi nished print. If necessary, reduce with 5-10% of Reducer (PLRE-9000). When printing on light colored fabrics you may add Extender Base or Soft-hand Base in a ratio of up to three parts base to one part ink. This will reduce the opacity of the ink and result in a softer hand however, the color will not be changed. If build-up on the back of the screen becomes a problem, add 1-2% by weight of Flow Control Additive (MIXO/MIXE-9020). Color Mixing Instructions: The formulas and instructions for simulating the standard PANTONE colors and the Union Ink standard colors are available free after registering on our web page @ www.unionink.com. Printing on Cotton / Polyester Blends: For excellent results on cotton / polyester blended fabrics, substitute MIXE Low Bleed colors for the standard Mixopake colors. Alternately, the regular colors can be printed over a low-bleed underbase white such as PLHE-1070 /1075 Diamond and Premium Low Bleed Whites. Overprint Mixopake inks through 140-305 (55-120 metric) monofi lament mesh. Curing Instructions: These inks will fully cure when the entire thickness of ink layer reaches 300°F (149°C).
  • MIXE-5003 BLUE RED SHADE

    Regular Price:

    $29.99
    Instructions: 100% cotton white or dyed fabric. consistent & accurate color matches Stencils: Use any direct emulsion or capillary film compatible with plastisol inks Additives: We do not recommend reducing Mixopake inks when printing on dark fabrics as this will reduce the opacity of the fi nished print. If necessary, reduce with 5-10% of Reducer (PLRE-9000). When printing on light colored fabrics you may add Extender Base or Soft-hand Base in a ratio of up to three parts base to one part ink. This will reduce the opacity of the ink and result in a softer hand however, the color will not be changed. If build-up on the back of the screen becomes a problem, add 1-2% by weight of Flow Control Additive (MIXO/MIXE-9020). Color Mixing Instructions: The formulas and instructions for simulating the standard PANTONE colors and the Union Ink standard colors are available free after registering on our web page @ www.unionink.com. Printing on Cotton / Polyester Blends: For excellent results on cotton / polyester blended fabrics, substitute MIXE Low Bleed colors for the standard Mixopake colors. Alternately, the regular colors can be printed over a low-bleed underbase white such as PLHE-1070 /1075 Diamond and Premium Low Bleed Whites. Overprint Mixopake inks through 140-305 (55-120 metric) monofi lament mesh. Curing Instructions: These inks will fully cure when the entire thickness of ink layer reaches 300°F (149°C).
  • MIXE-2002 Yellow Green Shade

    Regular Price:

    $29.19
    Instructions: 100% cotton white or dyed fabric. consistent & accurate color matches Stencils: Use any direct emulsion or capillary film compatible with plastisol inks Additives: We do not recommend reducing Mixopake inks when printing on dark fabrics as this will reduce the opacity of the fi nished print. If necessary, reduce with 5-10% of Reducer (PLRE-9000). When printing on light colored fabrics you may add Extender Base or Soft-hand Base in a ratio of up to three parts base to one part ink. This will reduce the opacity of the ink and result in a softer hand however, the color will not be changed. If build-up on the back of the screen becomes a problem, add 1-2% by weight of Flow Control Additive (MIXO/MIXE-9020). Color Mixing Instructions: The formulas and instructions for simulating the standard PANTONE colors and the Union Ink standard colors are available free after registering on our web page @ www.unionink.com. Printing on Cotton / Polyester Blends: For excellent results on cotton / polyester blended fabrics, substitute MIXE Low Bleed colors for the standard Mixopake colors. Alternately, the regular colors can be printed over a low-bleed underbase white such as PLHE-1070 /1075 Diamond and Premium Low Bleed Whites. Overprint Mixopake inks through 140-305 (55-120 metric) monofi lament mesh. Curing Instructions: These inks will fully cure when the entire thickness of ink layer reaches 300°F (149°C).
  • 1160 Tan

    Regular Price:

    $28.75
    Tri-Flex 1100 Series plastisol, is formulated for direct wet-on-wet printing of athletic and leisure garments and can also be used for the manufacture of plastisol transfers.
  • 1127 Burgundy

    Regular Price:

    $28.75
    Tri-Flex 1100 Series plastisol, is formulated for direct wet-on-wet printing of athletic and leisure garments and can also be used for the manufacture of plastisol transfers.
  • 1716 LB Lemon Yellow

    Regular Price:

    $29.00
    Sta-True 1700 Series plastisol is formulated for printing on polyester and 50/50 polyester/cotton blends for minimal bleed where normal plastisol films would be discolored due to the fabric dyes bleeding into the screen printed film.
  • 1722 LB Scarlet

    Regular Price:

    $28.50
    Sta-True 1700 Series plastisol is formulated for printing on polyester and 50/50 polyester/cotton blends for minimal bleed where normal plastisol films would be discolored due to the fabric dyes bleeding into the screen printed film.
  • 1701 Phoenix White

    Regular Price:

    $29.99
    Sta-True 1700 Series plastisol is formulated for printing on polyester and 50/50 polyester/cotton blends for minimal bleed where normal plastisol films would be discolored due to the fabric dyes bleeding into the screen printed film.
  • 1114 Lakers Gold

    Regular Price:

    $29.00
    Tri-Flex 1100 Series plastisol, is formulated for direct wet-on-wet printing of athletic and leisure garments and can also be used for the manufacture of plastisol transfers.
  • PADE-2102 Khaki

    Regular Price:

    $29.23
    Maxopake inks are the most opaque plastisol colors available. Even the neon colors are brightand highly opaque. Maxopake inks are recommended for direct manual or machine printing on black and dark colored garments. When printing on whites and light–colored fabrics we recommend adding the appropriate extender base for a softer hand, to minimize the potential for crocking and economy.
  • PADE 6016 Lime Green

    Regular Price:

    $28.92
    Maxopake inks are the most opaque plastisol colors available. Even the neon colors are brightand highly opaque. Maxopake inks are recommended for direct manual or machine printing on black and dark colored garments. When printing on whites and light–colored fabrics we recommend adding the appropriate extender base for a softer hand, to minimize the potential for crocking and economy.
  • PADE 5036 Royal Blue

    Regular Price:

    $29.72
    Maxopake inks are the most opaque plastisol colors available. Even the neon colors are brightand highly opaque. Maxopake inks are recommended for direct manual or machine printing on black and dark colored garments. When printing on whites and light–colored fabrics we recommend adding the appropriate extender base for a softer hand, to minimize the potential for crocking and economy.
  • PADE 2046 Rebel Gold

    Regular Price:

    $28.76
    Maxopake inks are the most opaque plastisol colors available. Even the neon colors are brightand highly opaque. Maxopake inks are recommended for direct manual or machine printing on black and dark colored garments. When printing on whites and light–colored fabrics we recommend adding the appropriate extender base for a softer hand, to minimize the potential for crocking and economy.
  • PADE 6008 Brite Green

    Regular Price:

    $28.92
    Maxopake inks are the most opaque plastisol colors available. Even the neon colors are brightand highly opaque. Maxopake inks are recommended for direct manual or machine printing on black and dark colored garments. When printing on whites and light–colored fabrics we recommend adding the appropriate extender base for a softer hand, to minimize the potential for crocking and economy.
  • PADE 6022 Chrome Green

    Regular Price:

    $28.51
    Maxopake inks are the most opaque plastisol colors available. Even the neon colors are brightand highly opaque. Maxopake inks are recommended for direct manual or machine printing on black and dark colored garments. When printing on whites and light–colored fabrics we recommend adding the appropriate extender base for a softer hand, to minimize the potential for crocking and economy.
  • PADE 5015 Columbia Blue

    Regular Price:

    $29.38
    Maxopake inks are the most opaque plastisol colors available. Even the neon colors are brightand highly opaque. Maxopake inks are recommended for direct manual or machine printing on black and dark colored garments. When printing on whites and light–colored fabrics we recommend adding the appropriate extender base for a softer hand, to minimize the potential for crocking and economy.

1 - 16 of 30

Page:
  1. 1
  2. 2
My Wishlist View Wishlist

You have no items in your wishlist.