Nova is a multipurpose dual cure one par pre-sensitized emulsion for Solvent, Plastisol, and UV Inks. Nova has is 58% solids to give great coverage on the screen. Nova is recommended for graphic printing. Nova is a fast exposing emulsion that give clear sharp edges and detail for fine art.
Pocono Edge is a photopolymer pre-sensitized emulsion. This durable, quick exposing emulsion is for use with Plastisol and Waterbased inks. It coats smoothly and evenly with pinhole-free coverage, sharp edges, and excellent resolution.
Premium, universal, red dual cure photoemulsion intended for all extreme textile and graphic printing applications. With medium viscosity and an extremely high 46% solids, DC 565 yields high stencil buildup with low Rz. It offers superior resolution, wide exposure latitude and outstanding performance.
Blue pure photopolymer emulsion. Resistant to UV-cured, plastisol and solvent-based ink. Water resistant when post-exposed. High solids content and medium viscosity for excellent print definition on any mesh. Easy to reclaim.
A blue diazo photoemulsion intended for use with plastisol inks only.
This high-quality, yet economical emulsion reaches exposure speeds of
many dual cure systems. Its high viscosity won’t sag in low mesh
counts, yet its rheology behavior allows high stencil buildup with
minimal coatings. DZ 307 offers 37% solids with durability to withstand
over 40,000 impressions, replacing more costly dual cure systems in
many applications. Freeze/thaw stable.
Universal, blue dual cure photoemulsion intended for most textile and graphic shops who need a versatile, inexpensive stencil. Its high 37% solids, low viscosity and excellent leveling allows for fast coating without pinholes. DC 521 copies with incredible detail and speed. A low cost, high performer.
Possibly the fastest exposing one-part available, PC 701 also has the
highest known solids content of any emulsion! Testing has shown PC 701
to expose more than 3 times faster than other SBQ emulsions. With
extremely high 52% solids, this SBQ emulsion allows you to use minimal
coatings and create high-density stencils of 400+ microns, replacing
more expensive capillary films. It offers textile printers excellent
resistance to plastisol ink, easy reclaimability and an extended shelf
Red pure photopolymer direct emulsion resistant to plastisol ink, abrasion and humidity. Exposes 8x faster than a diazo or dual-cure emulsion. 42% solids content and medium viscosity for easy coating
and good bridging on wide range of mesh counts. No mixing required and no diazo staining. Water resistant when post exposed.
Dual-cure direct emulsion for printing UV cured, plastisol, solvent-based, and water-based inks. Excellent print definition on any mesh. Upon drying, stencils lack the tackiness typical of dual-cure emulsion. 42% solids content