HARLACHER H28-5
tensioning machine
back guiding rail with specialized right angle clamps
The HARLACHER H28-5, the tensioning machine for high quality results, is specifically constructed to produce large or several screens in one stretching process.
All types of mesh can be processed to produce screens and sieves with an accurate and uniform tension. The quality results exceed the highest needs in all industries, even the extremely precise demands in the electronic industry.
It is possible to reach an equal and uniform tension over the entire mesh surface. This is done by tensioning on all 4 sides with clamps placed on a special linear guide, that are able to give way slightly.
All functions on this machine are driven by electro motors which can be switched to an accelerated mode for simple adjustment to several frame sizes. Frames can be mounted parallel or at any angle to the warp and weft direction of the mesh.
Sizes with a tension area from 1500 x 1500 mm up to 4200 x 9000 mm are available.