The EZ Grip handle is a revolutionary design that relieves the physical strain common with "pinch" type squeegees. Print fatigue is dramatically reduced with better control of squeegee angle and pressure. The EZ Grip is made of durable and chemical-resistant composite plastics. The 13" handle can accept up to a 14" blade if needed.
Versatile ink remover, cleans solvent based, UV-Cured and Textile inks. Low foam and low odor and can be used for manual or automatic cleaning. Can be mixed with ER6 and used as onestep ink and stencil remover.
Manufactured to Saati Prints specifications with their exclusive urethane formulation that locks in abrasion resistance. Dura-Life Squeegees hold up longer on press and resist softening, including UV and conventional solvent applications. Dura-Life will not be affected adversely by humidity, or harden in storage.
CURES AT 150F-200F! Superb and versatile bleed resistance. Excellent coverage and opacity on dark color substrates. Complete fusion just with two flash cure units at 200F for 3-4 seconds. Extraordinary strong adhesion on every substrate without catalyst. Must be used with other Xtreme low cure inks.
Sta-True 1700 Series plastisol is formulated for printing on polyester and 50/50 polyester/cotton blends for minimal bleed where normal plastisol films would be discolored due to the fabric dyes bleeding into the screen printed film.
EasiSolv™ 701 Screen Wash / Stain Remover is an environmentally approved, 100% active, low odor, extremely quick penetrating and fast acting solvent designed to dissolve and clean virtually all types of screen printable inks, adhesives, clear coatings and stains from printing mesh.
Superior White is formulated for printing on 100% Polyester garments and providing maximum coverage and
excellent bleed resistancy. This product contains no organic peroxides or bleaching agents. Very creamy from start
to finish. Performs on both automatic and manual presses. Finishes with a smooth hand and a very opaque
appearance. Recommended for use on fleece, polyester jerseys and all athletic wear in the polyester family. It is
highly recommended that test prints always be performed prior to production runs.
Red pure photopolymer direct emulsion resistant to plastisol ink, abrasion and humidity. Exposes 8x faster than a diazo or dual-cure emulsion. 42% solids content and medium viscosity for easy coating
and good bridging on wide range of mesh counts. No mixing required and no diazo staining. Water resistant when post exposed.